Blast Tape & Misc Consumables

Many abrasive blasters require miscellaneous blasting consumables such as sandpaper, blast tape, nozzle pressure test kits – to help the efficient completion of blasting projects.

Showing all 7 results

    • Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
    • Typically used as part of the surface preparation process prior to application of coatings.
    • Apply using a pressure washer before you blast.
    • Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
    • Sold in 5 Gallon Drums
    • Genuine Products - Manufactured by Chlor-Rid
     
    • Chlor*Rid is a liquid soluble salt remover, which includes chlorides, nitrates, and sulfates
    • Typically used as part of the surface preparation process prior to application of coatings.
    • Apply using a pressure washer before you blast.
    • Removing them prior to blasting means they will not be blasted into your profile and decrease the risk of coating failures
    • Sold in 5 Gallon Drums
    • Genuine Products - Manufactured by Chlor-Rid
     

    Web price i

    $351.00

    Ship to 20149

    Part Number Cost  
    CHE132C
    $351.00
    Chlor*Rid Liquid Soluble Salt Remover

    Part #CHE132C

    View Product Details

    Web price i

    $351.00

    Ship to 20149

    • HoldBlast is a Cost effective flash rust prevention solution
    • Environmentally safe and compatible with all coatings
    • It is used to "Hold the Blast" to allow primer to be applied.
    • Added in low concentration (2-10%) to the 'blast water' to prevent flash rusting
    • Ideal to mix with your water when wet blasting
    • This is a cheaper version to Hold-Tite 102.
    • Sold in 5 gallon pails
    • 32 pails ship on 1 pallet
    • HoldBlast is a Cost effective flash rust prevention solution
    • Environmentally safe and compatible with all coatings
    • It is used to "Hold the Blast" to allow primer to be applied.
    • Added in low concentration (2-10%) to the 'blast water' to prevent flash rusting
    • Ideal to mix with your water when wet blasting
    • This is a cheaper version to Hold-Tite 102.
    • Sold in 5 gallon pails
    • 32 pails ship on 1 pallet

    Web price i

    $180.00

    Ship to 20149

    Part Number Cost  
    CHRUSTEX
    $180.00
    HOLD*BLAST Rust Inhibitor by Chlor-Rid

    Part #CHRUSTEX

    View Product Details

    Web price i

    $180.00

    Ship to 20149

  • Abrasive blasting hopper lid and mesh screen
      • Lid and Screen Set designed to suit blast pots
      • Hole size 1/8 (3 mm)
      • Screen sieves foreign matter out of the abrasive
      • Lid keeps moisture, rain, dew, etc out of the blast machine
      • Select the size to suit diameter of your blast pot 12" 18" 24"
      • Fit most portable blast machines, made by Schmidt abrasive blasting, Axxiom Manufacturing, Clemco
     

    Web price i

    $253.00 - $387.00

    Ship to 20149

    $253.00
    Part Number Item Size Cost  
    BM5012010 12" (1 - 2 cuft pot)
    $253.00
    Lid and Screen Set for Blast Machines and Pots

    Part #BM5012010

    View Product Details

    Web price i

    $253.00

    Ship to 20149

    BM5012030 18" (3.5 cuft pot)
    $258.00
    Lid and Screen Set for Blast Machines and Pots

    Part #BM5012030

    View Product Details

    Web price i

    $258.00

    Ship to 20149

    BM5012060 24" (6.5 cuft pot)
    $387.00
    Lid and Screen Set for Blast Machines and Pots

    Part #BM5012060

    View Product Details

    Web price i

    $387.00

    Ship to 20149

    • For testing air pressure at the nozzle
    • Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
    • Insert about 6-10ft behind blaster for most accurate reading
    • Test kit includes:
      • Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
      • Four needles and instructions
      • Protective leather bound case
    • Sold as a Kit
    • Genuine Product - Manufactured by BlastOne
    • For testing air pressure at the nozzle
    • Uses hyperdermic needles which insert into the blast hose to take the nozzle pressure
    • Insert about 6-10ft behind blaster for most accurate reading
    • Test kit includes:
      • Liquid filled stainless steel pressure gage with dual pressure & efficiency scale
      • Four needles and instructions
      • Protective leather bound case
    • Sold as a Kit
    • Genuine Product - Manufactured by BlastOne

    Web price i

    $127.00

    Ship to 20149

    Part Number Cost  
    BAHNGKit
    $127.00
    Nozzle Pressure Test Kit

    Part #BAHNGKit

    View Product Details

    Web price i

    $127.00

    Ship to 20149

    • Reinforced, cloth tape with adhesive backing
    • Use for sealing, masking, protecting
    • Black color, other options and sizes available - contact BlastOne for details
    • Available Widths:
      • 2" (48 mm)
      • 4" (100 mm)
    • Sold in carton quantities only

    Web price i

    $137.00 - $152.00

    Ship to 20149

    $152.00
    Part Number Width Cost  
    BATB4836 2 Inch
    $152.00
    Premium Blast Tape

    Part #BATB4836

    View Product Details

    Web price i

    $152.00

    Ship to 20149

    • Designed to hold warning signs on a jobsite.
    • Light and easy to move, folds flat for transport
    • Compatible with signs 24" x 24" and 24" x 18"
    • Swing Stand Sign Frame
    • Sign Not Included - order separately
    • Designed to hold warning signs on a jobsite.
    • Light and easy to move, folds flat for transport
    • Compatible with signs 24" x 24" and 24" x 18"
    • Swing Stand Sign Frame
    • Sign Not Included - order separately

    Web price i

    $135.68

    Ship to 20149

    Part Number Cost  
    NSSTD5
    $135.68
    Safety Sign Swing Stand Frame

    Part #NSSTD5

    View Product Details

    Web price i

    $135.68

    Ship to 20149

    • Visual representation of rust and coating preparation grades on steel substrates
    • Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
    • Handy flip-top, wire bound, reference book
    • Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
    • Not a certified visual standard - use as a guide
    • Visual representation of rust and coating preparation grades on steel substrates
    • Similar to SSPC-VIS 1 Visual Standards and Reference Photographs
    • Handy flip-top, wire bound, reference book
    • Provides a visual comparison with SSPC standards. Full color photographs. Wipe-clean gloss pages. Flip top wire binding. Supplied in a protective pouch.
    • Not a certified visual standard - use as a guide

    Web price i

    $85.00

    Ship to 20149

    Part Number Cost  
    INEBSPG
    $85.00
    Surface Preparation Guide Booklet

    Part #INEBSPG

    View Product Details

    Web price i

    $85.00

    Ship to 20149