Showing all 3 results
- Suits the ADS Series of AirPrep.
- Replacement deliquescent tablets to recharge an air dryer.
- Comes in 50 lb bags
- Installed at blast machine inlet for final stage moisture droplet removal before air enters blast machine
- Tangential flow and elementless design
- Minimal pressure loss for peak blasting productivity
- Supplied with manual drain valve
- Male threaded inlet and outlet ports
- Inlet fitting or ball valve not supplied - order separately
- Specify Size - 250cfm or 400cfm, based on the size of your blast nozzle and compressor
FOR RENTAL OR PURCHASE
- The Premium Industry Standard AirDryer
- Uses Aftercooler design to cool the air for maximum moisture removal
- Removes 90% of the moisture in the blasting air
- Pneumatic Fan motor mean you don't need electricity to run this onsite
- Size based on the size of your compressor
- Suitable for warm weather or indoor use
- Genuine Schmidt Products - Guaranteed to Perform!
A top priority for corrosion control contractors is knowing how to dry air for sandblasting. It is essential that you remove the moisture from your compressed air for efficient blasting. Moisture can cause your abrasive to clog, slow down your blasting speed and even cause your freshly blasted surface to rust.
Cool, dry air exits the air dryer and is connected to the hose for your blast machine. The result keeps moisture from the blasting surface which minimizes any potential rusting before the protective coating is applied.
Air dryers are used to dry the air between the compressor and the blasting or spraying equipment. Warm, moist air from the compressor enters the air prep dryer and travels into a radiator where the air is cooled. As the temperature drops from warm to cool, it then enters the expansion tank which causes the water to drop to the bottom. Cool, dry air exits the air dryer and is connected to the hose for your blast machine. The result keeps moisture from the blasting surface which minimizes any potential rusting before the protective coating is applied.